Volden Ready mixed Quick dry Plasterboard Jointing, filling & finishing compound 10kg 6L Tub (R342)

• Using a trowel apply the first layer - filling any larger holes or cracks in the process. An even surface can be achieved with a skim coat not exceeding 5mm in thickness. Allow approx 1 hour for the base layer to dry. Drying times can be affected by site conditions/temperatures and/or the thickness of the layer applied. Once the first coat has dried, apply a second layer and finish to a smooth and level surface. Allow the product to dry for a further hour depending on amount applied and site conditions/temperatures. Once set hard, gently rub down using sandpaper, Brush or wipe down the sanded surface to remove any dust created from sanding. Once the surface is clean it will be ready for decorating using matt or silk vinyl paint. Drying times can be impacted by site conditions/temperatures and/or the thickness of the layer applied, For oil based paints a suitable primer must be used, Clean your tools with clean water after use.
• Designed for jointing plasterboards when drylining and and for levelling wall irregularities. Easy to sand in preparation for decorating
• Keep out of reach of children and animals. Inhalation of dust must be avoided. The work area must be ventilated or move to fresh air. A suitable face mask should be worn if sanding. Dust may be an irritant to eyes, sensitive skin or respiratory system. If irritation persists seek medical advice. Ingestion should be avoided. If ingested, rinse mouth with clean water and seek medical advice.

Features and benefits

• Perfect for quickly filling, smoothing walls, ceilings and plasterboard repairs
• Ready Mixed
• Quick drying (60 minutes) - more coats can be applied in a shorter period of time
• Easy to sand
• Can fill up to 5mm deep in one application
• This plaster's white colour ensures a lower number of coats while painting
• Can be stored and reused at a later date (see use by date on packaging)